Items to consider While Deciding on LED Strip Lights


In a prior article we centered on the main things to be aware of when buying LED Strip Lights for the initial time. Now we are likely to get you through another phase; installation. Installing your LED Strips could be anything from quite simple to very difficult, but ultimately it will depend on what end result you are attempting to achieve with your lighting system. For instance, introducing a 1 metre strip of LED lighting into your kitchen cabinet may be a lot more self-explanatory than using 20 metres of RGB LED Strip Lights to outfit a team and run this on DMX Control. Regardless of what you do there are certainly a few universal things to be aware of and this article will get you through a number of them.

We will focus on the LED Tape itself. This consists of a long piece of high impact, flexible circuit board with surface mounted devices, or SMDs, positioned along its length. There are always a few different things to consider here including, LEDs per metre, LED chip size, strip light colour and length. Strip Lights are available in two LED per metre varieties LED Strip lights uk, 30 LED per metre and 60 LED per metre. As suggested by the name the latter has two times as many LEDs and will be a lot brighter compared to former. They are made to be found in a lighting context where they’re forced to contend with background illumination. So for instance if you intend to utilize them in a daylight setting, such as a shop street display, or add them to an area that already has general illumination and still want them to be seen, you need to decide for 60 LED per metre as their sharper light output makes them suited to these purposes. Apart from this a 30 LED per metre strip will be able to deal with other lighting arrangements, such as for instance club setups, or somewhere else they don’t need to contend with background lighting.

Whenever you consider the specifications of strip lighting you will most likely notice a series of four numbers that to most people mightn’t mean a lot. These actually reference how big is the individual LEDs on the strips. Typically you will see chip sizes of either 5050 (5mm by 5mm) or 3528 (3.5mm by 2.8mm). The important thing difference between those two forms of chip size is the consistency of light they produce. Smaller LEDs can create a more jagged and inconsistent effect, while larger LEDs will give you a more even spread of light.

Another decision to create is precisely what colour strip light you intend to buy. They are usually obtainable in three main colour varieties, including warm and cool white and interchangeable RGB. The former two are for adding stylish ambient lighting to commercial and domestic settings while avoiding being too garish with the end result. They may be used to aesthetically to improve the looks of an area by the addition of layered or accent lighting, or they are able to add functionality to kitchens, bathrooms or offices where they may be used as task lighting to help work. RGB LED is a direct substitute for old fashioned disco lighting and offers thousands of programmable effects. Typically they’ll run directly from a handy remote control which works together with a red eye sensor attached involving the strip light and transformer. However, DMX Control can be an option. This is a type of advanced effects programming that uses an industry standard signal to manage the brightness, colour and frequency of the lights.

Probably the most obvious consideration to create is the exact amount of strip lighting that you require. This depends on the nature of one’s setup and how complex your intentions are. Usually most lighting arrangements can be performed with just one strip. Strip Lights are available in 5 metre and 10 metre reels as standard, but longer or shorter bespoke lengths could be ordered so call your provider to locate out. Lengthening or shortening strip lighting can be done all by yourself as well. To shorten a reel light can be done by simply cutting the strip at among its cutting points spaced approximately 5cm apart along the size of the light. To add two items of strip together, and thereby increase the size of the light, you will need a soldering iron and some two core wire. Simply solder these wires with their respective plus and minus solder points at the conclusion of the strip light where the cut has been made and do the same on the other strip to accomplish the connection. This approach may be used to attain a bit of extra length, particularly when trailing them around a big corner.

This short article has given you a some of the main specifications related to LED Strip Lighting and how to ensure you receive precisely the right light you need for your purposes. Be aware of additional articles on how to ensure you meet the power requirements of one’s lighting system.

Leave a Reply

Your email address will not be published.